FAQs
FAQs
No, the tilt chain will only face one way. If the headrail is attached the wrong way, the tilt chain will face away from the room. To change headrail and tilt chain direction, first remove all vanes. Next, remove headrail and turn so controls are on the opposite side. Finish by reattaching vanes.
The width of your vertical blind will determine how many brackets and clips you receive. Please reference the chart below to determine the correct number of brackets and clips needed for your size blind.
| Width | # of Brackets | # of Clips |
| Up to 66" | 3 | 3 |
| 66 1/8" to 96" | 4 | 4 |
| 96 1/8" to 126" | 5 | 5 |
| 126 1/8" to 156" | 6 | 6 |
| 156 1/8" to 186" | 7 | 7 |
| 186 1/8" and above | 8 | 8 |
We do not restring vertical headrails. If under warranty, a replacement headrail can be provided. Please contact customer service for further assistance.
No. Vertical blinds can be mounted with either an inside or an outside mount.
Begin by positioning the mis-aligned vane(s) in the fully open position. Next, remove the misaligned vane from its clip, by gently pressing upwards and outwards until the vane releases from the clip. With a pair of pliers, grab the clip that previously held the vane and push it gently upwards until it snaps back into the headrail. Spin the wand until all vanes are in the fully opened position. Once that has occurred, grab your pliers and gently pull down on the clip so that the missing vane can be reattached to its clip.
Visit our cleaning and care page.
To view more technical information on Vertical Blinds such as critical dimensions download the Technical Guide below
